Kingsman Marquis Infinite MQRB4436 Installation Instructions Manual page 44

Zero clearance direct vent gas fireplace infinite series

Hide thumbs Also See for Marquis Infinite MQRB4436:

Table of Contents

MQRB4436 / MQRB5143 / MQRB6961 Liner & False Bottom Installation

See Thru:

MQRB44PB2, MQRB51PB2, or MQRB69PB2-[1ea.] Porcelain False Bottom

MQRB4436 (Uses 5143PLE), MQRB5143PLE or MQRB6961PLE-[2ea.] Porcelain End Panels

False Bottom & End

Panel Installation:

1. False Bottom

Insert False Bottom into

Fireplace. Fasten the

False Bottom to the

Burner Assembly with

[6] DT Screws

provided. Insert Pilot

Shield into False

Bottom.

2. End Panels

Remove the Liner

Retainer Clips in the

Firebox Top. Place End

Panels on top of the

False Bottom and tilt

into place at either end

of the Firebox. Replace

the Liner Retainer

Clips.

Note: Warping and Discoloration of Porcelain or Painted Metal Liners Is Not Covered Under Warranty.

Both Porcelain and Painted Metal Liners may discolor and warp during normal operation of your appliance. This is normal,

Warning

: Failure to position the parts in accordance with these diagrams or failure to use only parts

specifically approved with this appliance may result in property damage or personal injury.

13-1/8" for MQRB6961

and not considered a defect.

Table of Contents