Turning On The Dvr; Turning Off The Dvr - PACOM PDR16-RMT Series User Manual

Digital Video Recorder

Turning On the DVR

Press the power button located on the front panel to turn the system on. The system goes into the SmartGuard mode
as soon as it finishes its boot process.
CAUTION: The system will lock up if the monitor does not have high enough resolution. The DVR
requires 1024x768 resolution.

Turning Off the DVR

Click the POWER button in the SmartGuard mode or press the power button on the front panel to turn the system
off.
NOTE: When turning off the system, you must confirm that you want to turn off the unit. You will also be asked
for a user ID and password, or system quit procedure if the Shut Down option was selected for the user's
authorization during the SmartGuard setup.
CAUTION: The system can be shut down by force by pressing the power button on the front panel over
10 seconds. However, follow the normal shutdown procedures as mentioned above when the system is
operating normally. Turning off the DVR without shutdown procedures can cause damage to the
system.
3