PACOM PDR16-RMT Series User Manual page 35

Setting Up the Text-In
1. Click the Text-in device icon
NOTE: Up to 16 text-in channels are available using the WIBU key.
2. Move to Enable, and check the box to enable to use the selected text input device.
3. Move to Use Text-In OSD, and check the box if you want to display text-in information on the image.
4. Click the Select Text-In System button to set up the text-in device. Select the model of installed text-in system
from the Text-In Model list, and the COM port to use from the drop-down list. Click the Set up port... button to
display the Set up COM Port dialog box. Set the Baud rate from 300 to 256,000, select the Parity from None,
Even or Odd parity, select the Data bit from 7 bit or 8 bit format, select the Stop bit from 1 bit or 2 bits from the
drop-down list. You can save your changes by clicking the OK button. Selecting Cancel exits the dialog box
without saving the changes.
5. Move to Device, and select the type of text-in device to use.
NOTE: Each type of text-in device (User Define, GnomeII and so on) has different setup options which can be
defined by the user.
NOTE: When using the RS485 port on the extension card, select the given COM Port number. To check the
given COM port number, please refer to the installed card information displayed on the System Info. dialog box
by clicking the System Info. button.
6. Move to Save Image Files, and check the box to save the image as a JPG file when a selected text-in device
receives text-in data. The file will be saved in the temp/RecordExt under program installation folder
automatically. The Save Image files function operates regardless of the recording schedule.
NOTE: The hard disk drive for saving image files must have at least 700MB free space.
.
Digital Video Recorder
29