Table of Contents
Advertisement
User's Manual
Run CD/DVD Burner
Click the Run CD/DVD Burner radio button to initiate the CD/DVD burning program.
The CD/DVD burning program will be selected during the SmartSearch Environment Setup.
NOTE:
Drive & Disc Information: Select the CD or DVD recorder to use. Click the Eject button if you want to eject the
media from the drive, and click the Close button if you want to close the drive door. Clicking the Refresh button
updates the list of connected recorder. Disc displays the disc information, and Capacity displays the disc
capacity.
Burn & Erasing: Select the video files or folders to save after clicking the Add Files or Add Folder. Selected
files or folders will be displayed on the list. Clicking the Remove button deletes the selected files or folders. The
capacity bar above the list shows the data capacity. After selecting the files or folders to save, click the Burn
button. Click the Erase button to erase all data on the disc.
Options: Select options to set up options required.
General – Check the box beside Show Log Window to display the log list of the program, and check the box
beside Show Files in Disc to display files or folders saved on the selected disk.
Burning – Check the box beside Append Session to save the new data subsequently following the previous data
session, and check the box beside Close Disc Session to complete the burning. Checking the box beside Clear
File List does not display the file or folder list.
Erasing– Check the box beside Quick Erase to erase selected files more quickly, and check the box beside Eject
Disc to eject the disk automatically after completing burning or erasing.
NOTE: The burning might not be successful if the remaining space of the disk is not enough when saving the
new data subsequently following the previous data session.
Print: Click the button to print the current image.
42
Advertisement
Table of Contents
