PACOM PDR16-RMT Series User Manual page 19

Table of Contents

Advertisement

NOTE: When selecting the Network remote control for the user's authorization, you can control the DVR
remotely via network connections. Refer to the Setting Up the Authority section for details.
22. Move to HDD usage, and select either Once or Recycle. When Once is selected, the DVR stops recording
when the hard disk drive is full. When Recycle is selected, the DVR continues recording when the hard disk
drive is full by overwriting the oldest video.
23. Click the Set up Time Sync... button, and set up the time synchronization if required. See Appendix 6 – Time
Synchronization for details.
24. Click the Change Signal... button, and select the video input signal to each camera number (Camera 1 to
Camera 32) from a drop-down list (Input Signal 1 to Input Signal 16 for the camera numbers 1 to 16, and Input
Signal 17 to Input Signal 32 for the camera numbers 17 to 32).
25. Click the Note... button, and set up the note function. The user can add or delete notes. If you want to read the
note, select the line and click the View button. Click the Load button to load the saved note, the Save button to
save the current note, and the Text Save button to save the current note to the text file.
26. Click the Set up backup... button, and set up backup information. See the SmartBackup section.
27. Click the Set up pager... button, and set up pager information. See the SmartPager section.
NOTE: The Set up pager... button will be activated if you set up SmartPager to start in the SmartGuard setup.
28. Click the Set up Web Server... button, and set up an IIS (Internet Information Services) for the WebGuard
program.
29. Click the Load... button if you want to load typical settings. Click the Save... button if you want to save settings.
Click the Default button if you want to load default settings. You can save your changes by clicking the OK
button. Selecting Cancel exits the dialog box without saving the changes.
NOTE: Only the administrator level user can use the Load, Save and Default buttons.
Digital Video Recorder
13

Advertisement

Table of Contents
loading

Table of Contents