Upgrading Firmware Manually - Cisco RV130 Administration Manual

Managing Your Device
Upgrading Firmware or Changing the Language
STEP 4
STEP 5
STEP 1
STEP 2
STEP 3
STEP 4
!
CAUTION
STEP 5
STEP 6
Cisco RV130/RV130W Wireless Multifunction VPN Router Administration Guide
To be notified when new firmware is available or after the latest firmware is
upgraded, check one of the following check boxes:
• Notify via Admin GUI— Receive notifications on the device Administration
GUI when you log on the next time.
• Email to — Receive notifications through e-mail alerts. Click Email Address
to configure e-mail settings. This check box is dimmed if New Firmware E-
mail Alert is not enabled. For more information, see
Mailing.
Click Save.

Upgrading Firmware Manually

Choose Administration > Firmware/Language Upgrade.
In the Manual Firmware/Language Upgrade section, click the Firmware Image
radio button in the File Type field.
To upgrade to the latest firmware version, choose one of the following options to
upgrade from:
• cisco.com—Download the firmware from the cisco.com website.
• PC—Click Browse to locate and select the downloaded firmware on your
computer.
(Optional) To reset the device to default factory settings after the firmware is
upgraded, check Reset all configurations/settings to factory defaults.
Resetting the device to default factory settings erases all of your configuration
settings.
Click Start Upgrade.
After the new firmware image is validated, the new image is written to flash, and
the device is automatically rebooted with the new firmware.
Choose Status > System Summary to make sure the router installed the new
firmware version.
8
Configuring Log E-
134