Configuring Static Dhcp - Cisco RV130 Administration Manual

Multifunction vpn router
Hide thumbs

Advertisement

Table of Contents
Configuring Networking
Configuring LAN Settings
STEP 4
STEP 1
STEP 2
STEP 3
STEP 4
Cisco RV130/RV130W Wireless Multifunction VPN Router Administration Guide
Click Save.
To edit the settings of a VLAN, select the VLAN and click Edit. To delete a selected
VLAN, click Delete. Click Save to apply changes.

Configuring Static DHCP

You can configure your router to assign a specific IP address to a client device
with a specific MAC address.
To configure static DHCP:
Choose Networking > LAN > Static DHCP.
From the VLAN drop-down menu, choose a VLAN number.
Click Add Row.
Enter the following information:
Description
IP Address
MAC Address
To edit the settings of a static DHCP client, select the client and click Edit. To
delete a selected DHCP client, click Delete. Click Save to apply the changes.
Description of the client.
IP address you want assigned to the client device. The IP
address assigned should be outside the pool of the DHCP
addresses.
Static DHCP assignment means the DHCP server assigns
the same IP address to a defined MAC address every time
the client device is connected to the network.
The DHCP server assigns the reserved IP address when
the client device using the corresponding MAC address
requests an IP address.
MAC address of the client device.
The format for a MAC address is XX:XX:XX:XX:XX:XX
where X is a number from 0 to 9 (inclusive) or a letter
between A and F (inclusive).
3
33

Hide quick links:

Advertisement

Table of Contents
loading

  Related Manuals for Cisco RV130

This manual is also suitable for:

Rv130w