Appendix C: Upgrading Firmware; Figure C-1: Firmware Upgrade - Cisco Linksys WET54G User Manual

Wireless-G Ethernet Bridge

Appendix C: Upgrading Firmware

You can use the Bridge's Web-based Utility to upgrade the firmware; however, firmware should be upgraded
ONLY if you experience problems with the Bridge.
To upgrade the Bridge's firmware, follow these instructions:
1. Download the Bridge's firmware upgrade file from the Linksys website, www.linksys.com.
2. Extract the file on your computer.
3. Open the Bridge's Web-based Utility, and click the Help tab.
4. On the Help screen, click the Firmware Upgrade button.
5. The screen shown in Figure C-1 will appear. In the field provided, enter the name of the extracted firmware
upgrade file, or click the Browse button to find this file.
6. After you have selected the appropriate file, click the Upgrade button, and follow the on-screen instructions.
Appendix C: Upgrading Firmware
NOTE: If you upgrade the Bridge's firmware, you
may lose its configuration settings.

Figure C-1: Firmware Upgrade

35