Changing The Language; Restarting The Device; Restoring The Factory Defaults - Cisco RV130 Administration Manual

Managing Your Device

Restarting the Device

STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
Restarting the Device
STEP 1
STEP 2

Restoring the Factory Defaults

!
CAUTION
Cisco RV130/RV130W Wireless Multifunction VPN Router Administration Guide

Changing the Language

To change the language on the device:
Choose Administration > Firmware/Language Upgrade.
In the File Type field, click the Language File button.
Click Browse to locate and select the language file.
(Optional) To restore the device configuration parameters to factory default values,
select Reset all configuration/settings to factory defaults.
Click Start Upgrade.
To restart the router:
Choose Administration > Reboot.
Click Reboot.
During a restore operation, do not try to go online, turn off the router, shut down the
PC, or use the router until the operation is complete. This should take about a
minute. When the test light turns off, wait a few more seconds before using the
router.
8
135