Cisco RV130 Administration Manual page 34

Configuring Networking
Configuring LAN Settings
STEP 4
STEP 5
Cisco RV130/RV130W Wireless Multifunction VPN Router Administration Guide
Disable Disables DHCP on the device when you want to manually
configure the IP addresses of all of your network devices.
DHCP Relay Relays the IP addresses assigned by another DHCP server to
the network devices.
If you enabled the device DHCP server, enter this information:
Starting IP Address
Maximum Number of
DHCP Users
IP Address Range
Client Lease time
Static DNS 1
Static DNS 2
Static DNS 3
WINS
If you selected DHCP Relay, enter the address of the relay gateway in the Remote
DHCP Server field. The relay gateway transmits DHCP messages to network
device, including those on other subnetworks.
Click Save.
The first address in the IP address pool. Any DHCP
client joining the LAN is assigned an IP address in
this range.
The maximum number of DHCP clients.
(Read-only) The range of IP addresses available to
the DHCP clients.
Duration (in hours) that IP addresses are leased to
clients.
IP address of the primary DNS server.
IP address of the secondary DNS server.
IP address of the tertiary DNS server.
IP address of the primary WINS server.
3
31