Configuring Networking
STEP 4
STEP 1
STEP 2
STEP 3
Cisco RV130/RV130W Wireless Multifunction VPN Router Administration Guide
DNS Server Source
Click Save.
Configuring L2TP
To configure L2TP settings:
Choose Networking > WAN.
From the Internet Connection Type drop-down menu, choose L2TP.
Enter this information:
Internet IP Address
Subnet mask
Default Gateway
L2TP Server
Version
Cookie Length
The DNS server address. If you already have DNS
server addresses from your ISP, choose Use these
DNS Servers, and enter the primary and secondary
addresses in the Static DNS 1 and Static DNS 2
fields.
To get DNS server addresses from your ISP,
choose Get Dynamically from ISP.
To use the DNS servers provided by OpenDNS
(208.67.222.222, 208.67.220.220) to resolve your
web addresses, choose Use OpenDNS.
The IP address of the WAN port.
The subnet mask of the WAN port.
The IP address of the default gateway.
The IP address of the L2TP server.
The L2TP version that you want to use. If you select
version 3, enter the vendor ID, and the virtual circuit
ID.
The size of the cookie in the L2TP v3 data packet,
which identifies the L2TP session.
3
21