Importing Authorized Ap Lists - Cisco RV130 Administration Manual

Configuring Wireless Networks
Detecting Rogue Access Points
STEP 1
STEP 2
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 6
STEP 7
STEP 8
STEP 9
Cisco RV130/RV130W Wireless Multifunction VPN Router Administration Guide
To authorize detected access points:
In Rogue AP Detected Table, check the box for the access point that you want to
authorize.
Click Authorize.
To add an access point to the Authorized AP table:
Click Add Row.
Enter the MAC address of the access point that you want to authorize.
Enter the SSID or the name that identifies the wireless network.
Choose the security mode associated with the access point.
Choose TKIP (Temporal Key Integrity Protocol) or CCMP (Counter Cipher Mode
Protocol) as the encryption algorithm associated with the access point.
Choose RADIUS server or PSK (Pre-Shared Key) to authenticate the access point.
Select the wireless network mode that the access point uses.
Choose the radio frequency that the access point uses.
Click Save.

Importing Authorized AP Lists

You can import a list of authorized access points using a CSV file. Use the
following values as a reference when you create the CSV file.
4
73