Configuring Basic Wireless Settings - Cisco RV130 Administration Manual

Configuring Wireless Networks

Configuring Basic Wireless Settings

Configuring Basic Wireless Settings
STEP 1
STEP 2
STEP 3
Cisco RV130/RV130W Wireless Multifunction VPN Router Administration Guide
SSID Name ciscosb1
WPS Enabled
Hardware
Button
1. When using the Setup Wizard, select Best Security or Better Security to protect the
device from unauthorized access.
Choose Wireless > Basic Settings to configure basic wireless settings.
To configure basic wireless settings:
Choose Wireless > Basic Settings.
In the Radio field, check the Enable box to turn on the wireless radio. By default
there is only one wireless network enabled, ciscosb1.
In the Wireless Network Mode field, choose one of these options from the
drop-down menu:
B/G/N-Mixed
B Only
G Only
N Only
B/G-Mixed
G/N-Mixed
ciscosb2 ciscosb3
Disabled Disabled
If you have Wireless-N, Wireless-B, and Wireless-G
devices in your network. This is the default setting
(recommended).
Choose this option if you have only Wireless-B
devices in your network.
Choose this option if you have only Wireless-G
devices in your network.
Choose this option if you have only Wireless-N
devices in your network.
Choose this option if you have Wireless-B and
Wireless-G devices in your network.
Choose this option if you have Wireless-G and
Wireless-N devices in your network.
4
ciscosb4
Disabled
62