Reset Feature - KoamTac KDC200 User Manual

3.7 Reset Feature

The Reset feature lets you restart the KDC if necessary without losing any stored barcode data or option
settings. To reset the KDC, follow these steps.
Connect the KDC to your PC.
1.
Press DOWN scroll button and SCAN button simultaneously for 5 seconds.
2.
When the LEDs illuminate yellow, release the buttons.
3.
The KDC initial screen, KoamTac Data Collector KDC displays when reset is complete.
4.
Note:
DOWN Scroll Button
Figure 7 - Reset Function of KDC100
KDC100 - Connect to your PC directly using the swing out, Type A USB connector.
See Figure 7.
KDC200 / KDC200P / KDC300 - Connect to your PC using the included cable, attaching
the ultra mini USB connector to your KDC and the standard, Type A connector to your
PC's USB port. See Figure 6.
The KDC stores collected data into flash memory and will not lose data or the KDC settings
during the reset process.
Scan Button
DOWN Scroll Button
Figure 6 - Reset Function for KDC200 - KDC200P - KDC300
33
KDC200 User Manual
Scan Button