Data Filter Settings - KoamTac KDC200 User Manual

KDC200 User Manual
Starting quantity
Enter a predefined start quantity for each scanned barcode. The start quantity can be defined from
1 to 128 and is modifiable using up or down side key.
Waiting to scan
Enter the number of seconds the KDC pauses before the user prompts display. During this timeout
period, the user can modify the quantity. If this field is set to zero, the quantity field cannot be
adjusted. This field can be defined from "-1" to "30" seconds. "-1" second enables infinite waiting of
user quantity input.
Enable data filter
Click on this box to enable the data filtering option. Data filtering allows you to predefine different
aspects of the barcode data you are collecting.

Data Filter Settings

When you select Enable data filtering, you must click on the Settings box to select the Data filter setting.
The option for the data filter settings are the same for Step1, Step 2, and Step 3.
Figure 22 – Data Filter Settings
53