Manual Installation; Windows Xp, Vista, And 7; Windows Mobile 5.0 - KoamTac KDC200 User Manual

2.2 Manual Installation

The KDC is equipped with one ultra mini USB port which is used to upload barcode data and to charge
the KDC battery. Prior to using the KDC, KTSync software and KDC device driver must be installed on
your computer. Using the USB cable included with the KDC, follow the directions below.
NOTE: If you have the KDC100, it has two ports, Ultra Mini and standard Type A which swings
out. See Figure 2 for more details.

Windows XP, Vista, and 7

1. Insert the KoamTac Installation CD into your computer's disk drive.
2. Create a directory called KoamTac on your computer.
3. Copy XP.Vista.7 directory from KoamTac CD to KoamTac directory. The XP.Vista.7
directory contains KTSync
user manuals.
4. Connect KDC cable to ultra mini USB connector on the KDC.
5. Connect KDC cable to Type A USB connector on your computer. Wait until your computer
beeps and/or displays the message New Hardware Found. You will be prompted to search
for a device driver for KDC.
6. Browse then select KTReader.inf file from the KoamTac directory created in Step 2. Follow
screen prompts to continue with the device driver installation.
NOTE: KTReader.inf is the device driver for 32bit Microsoft
Windows 7. If you have a 64bit computer, use KTReader.inf file from XP.Vista.64bit folder
in the KoamTac directory.

Windows Mobile 5.0+

Please connect your Windows Mobile PDA to your computer before software installation.
Create a directory and name it KoamTac on the PDA.
Copy Mobile5.0_6.0 directory from KoamTac CD to PDA KoamTac directory.
Mobile5.0_6.0 contains KTSync
5.0, Mobile 6.0 Standard, and Mobile6.0 Professional. It also includes KDC User Manual.
®
programs for Microsoft
®
programs for Microsoft
22
KDC200 User Manual
®
Windows XP, Vista, Windows 7 and
®
Windows XP, Vista, and
®
Windows Pocket PC 2003, Mobile