Unpacking Your Receiver Kit; Standard Kit Components; Accessories - Topcon HiPer VR Operator's Manual

• Topcon Integrated Leveling Technology
• External power, USB, and serial-data ports
• GNSS Antenna Connector
• Internal 8 GB memory storage
Virtual serial port via USB
•
One-Pulse-Per-Second (1-PPS) output
•
• Data access using USB read only
The HiPer VR comes in one of the following configurations:
• R2 Lite UHF radio module
• R2 Lite FH915 radio module
Without UHF/FH915 radio
•

Unpacking Your Receiver Kit

This section describes the documentation, standard kit components
your receiver. When you unpack your receiver kit, verify that you received the items listed in this
section. If any items are missing or damaged, contact your local Topcon dealer. See "Getting Technical
Support".

Standard Kit Components

Table 1-1 lists the standard kit components for the HiPer VR. For more information about the included
cables, see "Cables".
HiPer VR Receiver
Power Adapter
Micro-USB Cable
HiPer VR GNSS Receiver Quick
Reference Card (P/N 1027033-01)
– Describes the LED behavior and
technical content.
Radio Antenna

Accessories

Topcon offers a wide variety of accessories specially designed to improve system flexibility and job
site efficiency. For more details on the optional accessories available for HiPer VR, contact your Topcon
dealer.
1. Components in the standard kits may differ based on your country or region. Contact your local Topcon dealer to
inquire about items included in your regional standard kit and accessories that are available with the receiver.
Unpacking Your Receiver Kit
Table 1-1. HiPer VR Standard Kit Components
Power Cable
Wall Charger Cable
Serial Cable
Warranty Card
P/N: 1023998-01
TM
(TILT)
1
and accessories that accompany
1-3