Konica Minolta Bizhub C300 Copy Manual page 88

Before making copies
Finisher FS-514
No. Part name
1 Output tray 1
2 Output tray 2
3 Dial [FN6]
4 Dial [FN5]
5 Dial [FN4]
6 Dial [FN2]
7 Lever [FN1]
8 Hole-punch waste container
9 Lever [FN3]
10 Stapler
11 Staple cartridge holder
12 Dial
Output tray OT-601
No. Part name
13 Optional output tray
Punch kit PK-510
No. Part name
14 Punch Kit*
Parts marked with an asterisk (*) are installed within the finisher and therefore
are not shown in the illustration.
C300
Description
Collects copies that are fed out
Collects copies that are fed out
Turned when clearing paper misfeeds within the
finisher
Turned when clearing paper misfeeds within the
finisher
Turned when clearing paper misfeeds within the
finisher
Turned when clearing paper misfeeds within the
finisher
Raised when clearing paper misfeeds within the
finisher
Removed when emptying hole-punch waste
that has accumulated from using the punch set-
tings
Lowered when clearing paper misfeeds within
the finisher
Moved to the front when clearing jammed sta-
ples
Removed from the stapler when replacing the
staple cartridge or clearing jammed staples
Turned to move the stapler to the front when
clearing jammed staples
Description
Collects copies
Description
Punches holes for filing printed pages when
punch kit is installed onto finisher
2
2-15