Konica Minolta Bizhub C300 Copy Manual page 326

Troubleshooting
Message
Please insert Fusing Unit
and close all doors.
Please install toner car-
tridge, and close all
doors.
Please insert Waste Ton-
er Box and close all
doors.
Please insert Image
Transfer Belt Unit and
close all doors.
Replenish paper.
Toner cartridge (X) needs
to be replaced soon.
There is no Toner.
Stapler empty. Replace
Staple Cartridge or can-
cel Staple mode.
Misfeed detected.
Reinsert the following #
of originals.
Malfunction detected.
Please call your Techni-
cal Representative.
Now Downloading Pro-
gram Data from
Firmware server.
Cannot be accessed due
to unauthorized access.
Please contact your Ad-
ministrator.
C300
Cause
The fusing unit is not installed
correctly.
The indicated toner cartridge
is not installed correctly.
The waste-toner box is not in-
stalled correctly.
The image transfer belt unit is
not installed correctly.
The indicated tray has run out
of paper.
The toner for the indicated
color is about to run out.
Since the toner for the indi-
cated color has run out, the
machine is unable to make
copies.
The staples have run out.
Since a paper misfeed oc-
curred, the machine is unable
to make copies.
After clearing a paper mis-
feed, it is necessary to reload
certain pages of the original
that have already been fed
through the ADF.
The machine malfunctioned
and is unable to make copies.
ΠCS Remote Care was acti-
vated by the technical repre-
sentative.
 Internet ISW is being
downloaded.
The authentication informa-
tion has become invalid since
the authentication attempts
have failed the specified
number of times.
Remedy
Reinstall the consumables or parts,
or contact your technical represent-
ative.
Load paper into the indicated tray.
(See "Loading paper into the tray 1"
on page 2-43, "Loading paper into
the tray 2, 3 or 4" on page 2-47,
"Loading paper into the LCT" on
page 2-49, and "Loading paper into
the bypass tray" on page 2-52.)
Prepare to replace the toner car-
tridge according to your mainte-
nance agreement.
Replace the toner cartridge accord-
ing to your maintenance agreement.
Replace the staple cartridge. See
"Replacing the staples" on
page 9-10.
Clear the paper misfeed. (See
"When the message "Misfeed de-
tected." appears" on page 5-5.)
Load the indicated original pages
into the ADF.
Inform your technical representative
of the code displayed on the touch
panel.
Do not turn off the machine with the
[Power] (sub power) key while this
message is displayed.
After turning off the machine with
the [Power] (sub power) key, turn off
the main power switch, and then
contact the technical representa-
tive.
Contact the administrator of the
machine.
5
5-71