Konica Minolta Bizhub C300 Copy Manual page 85

2
No. Part Name
1 Original glass
2 Fusing unit cover
3 Release levers
4 Fusing unit cover release button
5 Upper right-side door
6 Unlocking knob
7 Imaging unit
8 Charger-cleaning tool
9 Print head glass cleaning tool
10 Waste toner box
11 Waste toner box release lever
12 Main power switch
13 Total counter
14 Locking tab
15 Toner cartridges
16 Left partition glass
17 Original scales
18 Misfeed-clearing dial
2-12
Before making copies
Description
Place an original on the glass so that it can be
scanned. (See p. 3-9.)
Opened when clearing paper misfeeds in the fusing
unit
Used when clearing paper misfeeds in the fusing
unit.
Pressed to open the fusing unit cover
Opened when clearing paper misfeeds from inside
the main unit
Used when removing the imaging units
Creates the print image
Used to clean the electrostatic charger wire, for
example, when incorrect copies are produced (See
p. 10-6.)
Used to clean the surface of the print head glass,
for example, when replacing the imaging unit
Collects used waste toner
Used when removing the waste toner box
Used to turn the machine on and off (See p. 2-25)
Shows the total number of pages that have been
printed
Used when removing the toner cartridges
There are four toner cartridges: cyan (C), magenta
(M), yellow (Y) and black (K). The combination of the
four toners generates full-color images.
Used to scan the original when the ADF is used
Position the original so that it is aligned with the
scales. Also, use the scales to measure the loaded
original. (See p. 3-9.)
Turned when clearing paper misfeeds within the
ADF
C300