Konica Minolta Bizhub C300 Copy Manual page 133

3
4
Using the keypad, type
in the desired number of
copies.
– If the number of cop-
ies was incorrectly
entered, press the
[C] (clear) key in the
keypad, and then
specify the correct
number of copies.
5
Press the [Start] key.
– To stop the copy op-
eration being per-
formed, press the
[Stop] key. For de-
tails, refer to "Stop-
ping scanning/
printing" on
page 3-84.
– The next copy opera-
tion can be queued
while a copy opera-
tion is being per-
formed. For details, refer to "Scanning the next original to be copied
while a copy job is being printed (next job reservation)" on
page 3-82.
3-4
Basic copy operations
Stop
Start
C300