Konica Minolta Bizhub C300 Copy Manual page 463

Replacing toner cartridges and staples and emptying waste containers
9
4
Load the new staple car-
tridge into the staple car-
tridge holder.
– Do not remove the
remaining staples,
otherwise the ma-
chine will not be able
to staple after the
cartridge is replaced.
5
Insert the staple car-
tridge holder, making
sure the tabs on the
holder slide along the
rails in the compartment.
– Check that the staple
cartridge holder is
securely installed.
6
Close the front door.
Reminder
Replace the staple cartridge only after the message has appeared.
If the staple cartridge is replaced before the message appears, the ma-
chine may be damaged.
9-12 C300