To Punch Holes In Copies - Konica Minolta Bizhub C300 Copy Manual

Basic copy operations

To punch holes in copies

1
In the Basic screen, touch [Finishing].
The Finishing screen appears.
2
Touch [2-Hole] or [3-Hole].
– To cancel the Punch setting, touch [2-Hole] or [3-Hole] again to
deselect it.
– To cancel changes to the settings, touch [Cancel].
3
Touch [Position].
– Touch the button for the desired position, and then touch [OK].
– Touch [Auto] to automatically determine the position of the
punched holes according to the orientation of the loaded original. If
C300
3
3-77