Konica Minolta Bizhub C300 Copy Manual page 410

Application functions
Can sizes in metrics be displayed?
?
% Touch [
Size] is touched, the Custom Size screen appears. If [Photo Size] is
touched, the Photo Size screen appears.
Can any size be specified?
?
% Any size can be specified from the Custom Size screen. Touch [X]
or [Y], touch [↔] to switch between the integer and the fraction, and
then touch [–] and [+] to specify the dimensions of the scanning ar-
ea.
If a decimal value is displayed in the screen, press the [C] (clear)
key, and then use the keypad to type in the setting. For details on
switching between decimal and fraction values, refer to "System
setting" on page 12-17.
If a decimal value is displayed in the screen and the specified value
is outside the allowable range, the message "Input Error" appears.
Type a value within the allowable range. If the value was incorrectly
entered, press the [C] (clear) key to erase the value, and then spec-
ify the correct value.
6
If necessary, specify any other copy settings.
The number of copies is set to "1" and cannot be changed.
7
Press the [Start] key.
C300
] or [ ] to display a different list of sizes. If [Custom
8
8-43