Konica Minolta Bizhub C300 Copy Manual page 227

4
Can the specified settings for a copy program be checked?
?
% To check the programmed copy settings, touch the button for the
desired copy program, and then touch [Check Job]. For details, re-
fer to "Copying with programmed copy settings (Mode Memory)"
on page 4-14.
How is job deleted?
?
% Touch the button for the desired copy program, and then touch
[Del.]. In the screen that appears, requesting confirmation to delete
the copy program, touch [Yes] to delete the selected copy program.
6
Touch [OK] or [Cancel].
– The Basic screen can be displayed again if the [Mode Memory] key
is pressed.
!
Detail
Copy program settings cannot be changed.
If the copy program that was selected has been locked, [Edit Name] and
[Del.] do not appear. For details, refer to "System setting" on page 12-27.
To stop registering the program, press the [Reset] key or the [Mode Mem-
ory] key.
No matter which screen is displayed, the registration is cancelled.
Otherwise, continue to touch [Cancel] until the Basic screen is displayed.
4-12
Additional copy operations
C300