Konica Minolta Bizhub C300 Copy Manual page 394

Application functions
– If a decimal value is displayed in the Center Erase screen and the
specified value is outside the allowable range, the message "Input
Error" appears. Type a value within the allowable range. If the value
was incorrectly entered, press the [C] (clear) key to erase the value,
and then specify the correct value.
– To cancel the "Book Copy" function, touch [OFF].
What do the Book Erase functions do?
?
% The shadow of the book binding and the shadow of the book edges
can be erased from the copies. The "Erase" and "Center Erase"
functions can be used together.
How are settings specified for the "Erase" function?
?
% Refer to "Erasing specified areas of copies ("Erase" function)" on
page 8-62. In addition, if the "Erase" function in the Application
screen is specified, [Erase] under "Book Erase" will be selected.
6
Touch [OK], and then touch [OK] in the next screen that appears.
7
In the Basic screen, touch [Paper], and then select the paper tray load-
ed with the paper.
8
If necessary, specify any other copy settings.
9
Using the keypad, type in the desired number of copies.
C300
Center Erase screen
8
8-27