7. Foot Pedals Installation
The Cranks, Pedal Shafts, and Foot Pedals are marked "R" for Right and "L" for Left.
A. Insert the pedal shaft of Left Foot Pedal (#24L) into threaded hole in the left Crank
(#20).
Turn the pedal shaft by hand in the counter-clockwise direction until snug. Tighten the
pedal shaft of Left Foot Pedal (#24L) with the Multi Hex Tool with Phillips Screwdriver
provided.
Note: DO NOT turn the pedal shaft in the clockwise direction, doing so will strip
the threads.
B. Insert pedal shaft of Right Foot Pedal (#24R) into threaded hole in right Crank (#20).
Turn the pedal shaft by hand in the clockwise direction until snug. Tighten pedal shaft
of Right Foot Pedal (#24R) with the Multi Hex Tool with Phillips Screwdriver provided.
Note: DO NOT turn the pedal shaft in the counter-clockwise direction, doing so
will strip the threads.
ASSEMBLY
Tool:
Multi Hex Tool with Phillips Screwdriver
15