Chapter 3. Officeserv 7400 Specifications; Trunk Line Capacity; Table 3.2 Trunk Line Capacity - Samsung OfficeServ 7400 General Description Manual

CHAPTER 3. OfficeServ 7400 Specifications

System Configuration
Basic chassis + Expansion
chassis 1
Basic chassis + Expansion
chassis 1 + Expansion chas-
sis 2

3.1.1 Trunk Line Capacity

The maximum trunk line capacity of the OfficeServ 7400 based on its configuration is
shown in the table below:
System Configuration
Basic chassis
Basic chassis + Expansion
chassis 1
Basic chassis + Expansion
chassis 1 + Expansion chas-
sis 2
3-2
Table 3.1 OfficeServ 7400 Capacity (Continued)
When using E1: 930
When using 8TRK: 168
When using DLI/SLI: 336
When using the maximum capacity: 672 (voice)
When using the LAN switch: 352
When using the internal power of PLIM: 64
When using VDSL: 40
When using the WLAN terminal or IP phone: 992
MFM: 4 per system
RCM2: Up to 4 per system (R2 = 8 ports or CID = 14)
(R2 = 4/CID = 6 when both station and trunk lines are
supported.)
CRM: Up to 4 per system (MFM (20), R2 (16), or CID (16))
When using E1: 1260
When using 8TRK: 256
When using DLI/SLI: 512
When using the maximum capacity: 1024 (voice)
When using the LAN switch: 528
When using the internal power of PLIM: 96
When using VDSL: 60
When using the WLAN terminal or IP phone: 1344
MFM: 6 per system
RCM2: Up to 6 per system (R2 = 8 ports or CID = 14)
(R2 = 4/CID = 6 when both station and trunk lines are
supported.)
CRM: Up to 6 per system (MFM (20), R2 (16), or CID (16))

Table 3.2 Trunk Line Capacity

Analogue
LOOP TRK
80
168
256
Maximum Line Capacity
Digital
T1 TRK E1 TRK
480 600
744 930
1008 1260
© Samsung Business Communications
PRI TRK
T1: 480
E1: 600
T1: 744
E1: 930
T1: 1008
E1: 1260