Table 2.25 Main Svmi-20E Module - Samsung OfficeServ 7400 General Description Manual

CHAPTER 2. OfficeServ 7400 Hardware
The components on the front panel of the main SVMi-20E module have the following
functions:
Category
LAN
SIO
RST
LED VM1
VM2
VM3
HDD
LAT
LRT
SDN
PGD
2-36

Table 2.25 Main SVMi-20E Module

Function Description
The LAN interface connector is used for data transmission and data-
base backup and restoration.
The SVMi-20E backs up or restores data using the LAN provided by
the customer or through a laptop or PC connected directly to this
LAN connector.
Serial Interface for connecting to PC.
Button restarts the SVMi-20E (calls in process are disconnected).
LED blinks when one or more of the default ports 1~4 are used
LED blinks when one or more of the additional ports 5~8 are used
LED blinks when one or more of the additional ports 9~12 are used
LED blinks whenever contacting to hard disk driver.
LED turns green when LAN port is operated.
LED turns orange when transmitting data to LAN.
Indicating the system status. LED turns red when the system driver is
loaded and turns green when loading is terminated.
LED turns green when the system power supply is normal.
© Samsung Business Communications