Making Prints for Use as a Booklet (Booklet)
You can make prints which can easily be made into a booklet.
Selected documents
3
1
2
3
4
5
6
7
8
IMPORTANT
•
When the machine is operating in the Booklet mode, you cannot use the Collate, Two-sided
Printing, or Cover/Job Separator modes.
•
You cannot set the Booklet mode to record a size other than LTR or STMT.
•
Saddle stitching is not performed when there is only one sheet.
•
"Saddle Stitch" can only be specified when the Saddle Finisher-G1 (option) is attached.
•
Folds may appear differently depending on the type of paper.
NOTE
•
When you want to print documents for use as a booklet, we recommend that you scan the
original with the Booklet Scanning mode beforehand. (See 'Scanning Originals for Use as a
Booklet (Booklet Scanning),' on p. 2-28.)
3-22
Printing a Document in a Mail Box After Changing the Settings
NOTE
•
To cancel the setting, press "Special Features" → "Cover/Job Separator" → "Cancel," in
this order.
•
To cancel all settings at once, press "Initial Settings." (The machine returns to the standard
mode of Local Printing.)
•
To return the display to the Mail Box Selection screen, press
8
Prints
1
6
3
When the Saddle
Finisher-G1 is attached
(Reset).