Disassembly Procedures; Control Console Access/Facia Removal; Pc Board Removal - Maytag ADE7005AK Service Service Manual

Disassembly Procedures

!
Control Console Access / Facia Removal
1. Disconnect power supply to unit.
2. Remove Control Knobs and Cycle Selector Knob.
3. Remove three screws from Console top.
NOTE: Be sure to protect the shafts on the front of the
Console when tipping.
4. Tip the Console forward to access the wiring harness
and PC Board.
NOTE: Wear an Anti-Static Wrist Strap and ground
yourself before working with Electronic Control
Boards. Always handle boards by the edge and don't
touch discreet components.
5. Depress locking tabs on Facia to remove and replace.

PC Board Removal

1. Disconnect power supply to unit.
2. Access Control Console, see "Control Console
Access / Facia Removal" procedure.
16
WARNING
To avoid risk of electrical shock, personal injury or death;
disconnect power to unit and shut off gas supply before
performing any disassembly procedure.
NOTE: Wear an Anti-Static Wrist Strap and ground
yourself before working with Electronic Control
Boards. Always handle boards by the edge and don't
touch discreet components.
3. Remove wiring harness connectors from PC Board.
4. Depress the locking tab on the PCB.
5. Remove the PCB.
16026315
©2006 Maytag Services