Light Removal - Maytag ADE7005AK Service Service Manual

Disassembly Procedures
!
4. To switch Door Hinge side, remove screws around the
perimeter of the Door Panel. Rotate Door Panel 180
degrees and move Door Strike to opposite side of
Door. Reinstall screws. Reinstall Door. Continue to
next step for complete Door disassembly.
5. After Door Panel screws are removed the Door Gasket
can be removed from the Inner Door Panel.
©2006 Maytag Services
WARNING
To avoid risk of electrical shock, personal injury or death;
disconnect power to unit and shut off gas supply before
performing any disassembly procedure.

Light Removal

1. Disconnect power supply to unit.
2. Remove Top Cover, see "Top Cover / Door Switch /
Front Panel / Gasket Removal" procedure steps 1 - 2.
3. Remove Lens screw.
4. Depress locking tab on Light Socket and remove
through light cavity.
16026315 19