Igniter Removal; Burner Removal - Maytag ADE7005AK Service Service Manual

Disassembly Procedures
!
!
WARNING
To avoid risk of personal injury or death; shut off gas
supply to unit before servicing Burner Assembly.
Gas Model Disassembly

Igniter Removal

1. Disconnect power supply to unit.
2. Remove Top Cover.
3. Remove Console.
4. Remove Front Panel.
5. Loosen the single screw attaching the igniter to the
Burner Assembly. Slide the Igniter back and remove.

Burner Removal

1. Disconnect power supply to unit.
2. Shut off gas supply.
3. Disconnect incoming gas line to unit.
4. Remove two screws securing burner to bracket.
NOTE: The Igniter Bar is fragile. Be careful not to
damage Igniter when removing Burner Assembly.
24
WARNING
To avoid risk of electrical shock, personal injury or death;
disconnect power to unit and shut off gas supply before
performing any disassembly procedure.
NOTE: The Igniter Bar is fragile. Be careful not to
damage Igniter when removing Burner Assembly.
5. Remove the two screws attaching the housing to the
burner bracket. The screws are recessed from view.
6. Slide Burner Assembly from dryer.
16026315
©2006 Maytag Services