Disassembly Procedures; Door Reversal/Disassembly - Maytag MDE9700A Series Service Manual

Disassembly Procedures

!

Door Reversal/Disassembly

1. Disconnect power supply to unit.
2. Remove four screws and Door Strike.
3. Remove two screws attaching Door Hinge.
4. Install Door and Strike on opposite sides or continue
with Door disassembly.
5. Remove screws around perimeter of Door Inner
Panel.
16
WARNING
16025911 Rev. 0
To avoid risk of electrical shock, personal injury or
death; disconnect power to unit before servicing.
6. Remove Inner Panel.
7. Remove Gasket.
©2005 Maytag Services