Component Testing Information - Maytag ADE7005AK Service Service Manual

Component Testing Information

To avoid risk of electrical shock, personal injury or death; disconnect power and shut off gas to unit before servicing,
unless testing requires power.
Illustration
Thermistor
Door Switch
Light
Motor
Thermal Fuse
Hi Limit Thermostat
Thermal Cut Off
Heater Element
Cycling Thermostat
146 °F
14
!
Component
Unplug harness connector and test
from wire insertion side.
Pin #1 PK and Pin #11 PK of PS5.......
Unplug connectors and test switch
terminals.
Door open terminals............................
Door closed terminals..........................
Unplug connectors and test switch
terminals.
Check across terminals.......................
Unplug harness connector and test
motor circuits.
Pin #9 GY and Pin #9 Red (Windings).
Unplug connectors and test
Thermostat terminals.
Check across terminals.......................
Unplug connectors and test
Thermostat terminals.
Check across terminals.......................
Unplug connectors and test
Thermostat terminals.
Check across terminals.......................
Unplug connectors and test Heater
terminals..............................................
Unplug connectors and test
Thermostat terminals...........................
W ARNING
Test Procedure
16026315
Results
10000 ohms @ 77° F (25° C)
Infinity
Less than 1 ohm
80 to 100 ohms
2 ohms
Less than 1 ohm
Less than 1 ohms
Less than 1 ohm
10 ohms
Less than 1 ohm
©2006 Maytag Services