AND EJ-120 Instruction Manual page 15

Entering the upper and lower limit values
6. With Cp Hi
Enter the upper limit value using the following keys.
SAMPLE key
RE-ZERO key
PRINT key
UNITS key
Cp lo
7. With
Enter the lower limit value using the following keys.
SAMPLE key
RE-ZERO key
PRINT key
UNITS key
8. Press the PRINT key. Unit
end .
9. Press the UNITS
mode.
displayed, press the
To select the digit blinking to be
changed.
To set the value of the digit
selected. Hold down the key to
switch the sign "+" and "-".
("N" designates
value.)
To store the value and proceed to
the next step.
To cancel the value and proceed
to the next step.
displayed, press the
To select the digit blinking to be
changed.
To set the value of the digit
selected. Hold down the key to
switch the sign "+" and "-" (see
step 6).
To store the value and proceed to
the next step.
To cancel the value and proceed
to the next step.
key to return to the weighing
PRINT key.
a negative
PRINT key.
appears after
13
Cp Hi
HI
000000
Set using the
relevant keys
HI
001234
To store
Cp lo
LO
000000
Set using the
relevant keys
LO
001230
To store
end
Unit
Returns to
the weighing mode