Initialization Of Memory Area(Area Initial) - JRC JMA-9172-SA Instruction Manual

JMA-9172-SA Instruction Manual
7.4.2

Initialization of Memory Area(Area Initial)

If system operation is unstable, it may be stabilized by initializing the memory
area. To initialize the memory area, follow the procedure in this section. The
memory area is reset to the factory setting when initialized.
7.4.2.1 Partial Master Reset
Procedures
1) Open the Serviceman Menu.
Perform the following menu open procedure to open the Partial
2)
Master Rest operation menu for the memory area.
Select the items to be initialized.
3)
2. Except Serviceman Menu
4) Select
The memory areas of specified items are initialized, and the system is restarted.
7.4.2.2 All Master Reset
Procedures
1) Open the Serviceman Menu.
2) Perform the following menu open procedure to open the All
Master Rest operation menu for the memory area.
3) Select
The whole memory area is initialized, and the system is restarted.
>
7.SETTINGS FOR SYSTEM OPERATION
3. Maintenance Menu
→ 2. Area Initial
→ 1. Partial Master Reset
1. Serviceman Menu The set values in the Serviceman menu are initialized.
：
The set values not in the Serviceman menu are initialized.
：
The user-set values are initialized.
3. User Setting
：
4. TT Setting The set values for the target tracking function are initialized.
：
5. AIS Setting The set values for the AIS display function are initialized.
：
The color scheme and brilliance setting for the day/night
6. Day/Night
：
mode are initialized.
in the Confirmation Menu.
1. Yes
3. Maintenance Menu
→
2. Area Initial
→ 2. All Master Reset
in the Confirmation Menu.
1. Yes
7－ 39
>
7.4 MAINTENANCE MENU
7