JRC JMA-9172-SA Instruction Manual page 204

JMA-9172-SA Instruction Manual
[1] Depth Graph Display
• Determine whether to display received water depth information with a graph.
• One of two digital information areas is used to display data.
• When the water-depth graph is displayed, the sizes of the target tracking (TT)/
AIS numeric data display areas are exclusively decreased.
• Left-click the
water-depth graph display function is switched between On and Off.
[2] Depth Range
• Select the depth range on the water depth graph.
[3] Time Range
• Select the time range on the water depth graph.
[4] Depth Unit
• Set the unit of water depth for the water-depth graph.
> >
3.BASIC OPERATION 3.8 APPLIED OPERATIONS
button located at thelower righit of the display. The
Target
: Does not display a water depth graph.
Off
: Displays the water depth graph in digital information area 1.
Area1
Area2 : Displays the water depth graph in digital information area 2.
: Sets 50 m as the depth range.
50m
100m
: Sets 100 m as the depth range.
: Sets 250 m as the depth range.
250m
: Uses the depth range in the DPT sentence included in
AUTO
received data.
10min : Sets 10 minutes as the time range.
: Sets 15 minutes as the time range.
15min
30min
: Sets 30 minutes as the time range.
60min : Sets 60 minutes as the time range.
12hour : Sets 12 hours as the time range.
: The foot is used as the unit of water depth.
Feet
3 －108