JRC JMA-9172-SA Instruction Manual page 183

3.7.6.6 Route Information Display
Display the planned couse and the planned speed onto the route.
Procedures
1) Open the Next menu by performing the menu operation below.
Left-click the set value of the
select an operation mode.
3.7.6.7 Map Draw AZI Mode
Set the azimuth direction of the route and user map.
Procedures
1) Open the Next menu by performing the menu operation below.
Left-click the set value of the
an operation mode.
3.7.6.8 Updating Waypoint data (Waypoint Switch Mode)
Set how to update the Waypoint number when one Waypoint has been reached.
JMA-9172-SA Instruction Manual
Route
→ 2. WPT/Route Setting
→
9. Next
6. Route Information Display
: The Planned Course and the Planned Speed are
Off
not displayed.
: The Planned Course and the Planned Speed are
On
displayed.
Route
→ 2. WPT/Route Setting
→
9. Next
7. Map Draw AZI Mode
: The azimuth direction is set North Up mode.
N Up
: The azimuth direction is set Couse Up mode.
C Up
3－ 87
> >
3.BASIC OPERATION 3.7 USE ROUTE FUNCTION
item, and
item, and select
3