JRC JMA-9172-SA Instruction Manual page 396

JMA-9172-SA Instruction Manual
6) Insert the flat tip nonconductive screwdriver for
adjustment or some stick to the location shown
in the figure below and slide the battery
sideways to remove the battery.
[Assembly]
1) Check the polarity of the battery. Make sure that
the battery's positive (+) side is facing up.
2) Slide the battery sideways into the battery
holder.
3) Make sure that the battery is inserted fully.
[Check Item]
1) Check that no error message comes up.
2) Check that the system starts up normally.
[Notes]
>
8.COUNTERMEASURE FOR TROUBLE ...
8－ 22
>
8.4 REPLACEMENT OF MAJOR PARTS