JRC JMA-9172-SA Instruction Manual page 362

JMA-9172-SA Instruction Manual
7.3.3.2 Adjustment of Main Bang Suppression Area (MBS Area)
Procedures
Open the Serviceman Menu.
1)
2) Perform the following menu open procedure to open the MBS
Area adjustment menu.
Set the radar as follows:
3)
•
Set the radar range to 0.125 NM.
•
Set the radar video enhance function (ENH) to OFF.
•
Set the image processing (PROC) to OFF.
•
Turn the [RAIN] control to the minimum position (fully to the left).
•
Turn the [GAIN] control to the maximum position (fully to the right).
•
Turn the [SEA] control to achieve the strength with which main bang can be judged.
4) Adjust the value so that the main bang can be erased.
>
7.SETTINGS FOR SYSTEM OPERATION
9. RADAR/TT Initial Setup
→ 3. MBS
→
2. MBS Area
7－ 34
>
7.3 ADJUSTMENT