Table of Contents
Advertisement
Bosch Recording Station Appliance
1
Safety Precautions
1.1
General Safety Precautions
The following safety precautions must be observed:
Read, follow and retain instructions
All safety and operating instructions must be read and followed before installing the device.
Retain instructions for future reference.
Observe warnings
Observe all warnings on the device and in the Hardware Installation Manual.
Add-on devices
Do not use add-on devices that are not recommended by the product manufacturer as these
may cause hazards.
Installation notes
–
–
–
–
–
–
–
–
–
–
Cleaning
Unplug the device from the mains power supply before cleaning. Follow the instructions for
the device. Normally, cleaning can be carried out with a damp cloth. Do not use liquid
cleaners or cleaners in spray cans.
Service
Do not attempt to service the device yourself. You may be exposed to high electrical voltages
or other hazards if you open or remove covers. Servicing must be carried out by qualified
maintenance personnel.
Bosch Security Systems
Do not place the device on an unstable mounting, tripod or similar. The device may fall to
the ground and seriously injure the user or be damaged itself.
Only use accessories that have been recommended by the manufacturer or are delivered
with the device.
Fit the device according to the manufacturer's instructions.
Exercise extreme caution when transporting the device on a trolley. Abrupt stopping,
extreme force effects and uneven surfaces may cause the device and the trolley to tip
over.
Keep the area around the system clean and free of clutter.
Place the chassis top cover and any system components that have been removed away
from the system or on a table so that they won't accidentally be stepped on.
While working on the system, do not wear loose clothing such as neckties and
unbuttoned shirt sleeves, which can come into contact with electrical circuits or be
pulled into a cooling fan.
Remove any jewelry or metal objects from your body, which are excellent metal
conductors that can create short circuits and harm you if they come into contact with
printed circuit boards or areas where power is present.
After accessing the inside of the system, close the system back up and secure it to the
rack unit after ensuring that all connections have been made.
The system is heavy when fully loaded. When lifting the system, two people at either end
should lift slowly with their feet spread out to distribute the weight. Always keep your
back straight and lift with your legs.
Hardware Installation Manual
Safety Precautions | en
5
- | V1 | 2011.10
Advertisement
Table of Contents
