Table of Contents
Advertisement
38
en | Rack Installation
4.4
BRS 19-inch 2U - Rack Mounting Instructions
This section provides information on installing the chassis into a rack unit with the quick-
release rails provided. There are a variety of rack units on the market, which may mean the
assembly procedure will differ slightly. You should also refer to the installation instructions
that came with the rack unit you are using.
NOTE: This rail will fit a rack between 26" and 33.5" deep.
4.4.1
Separating the Sections of the Rack Rails
The chassis package includes two rail assemblies in the rack mounting kit. Each assembly
consists of two sections: an inner fixed chassis rail that secures directly to the chassis and an
outer fixed rack rail that secures directly to the rack itself.
1.
2.
3.
4.
- | V1 | 2011.10
Locate the rail assembly in the chassis packaging.
Extend the rail assembly by pulling it outward.
Press the quick-release tab.
Separate the inner rail extension from the outer rail assembly.
Hardware Installation Manual
Bosch Recording Station Appliance
Bosch Security Systems
Advertisement
Table of Contents
