Table of Contents
Advertisement
28
en | Maintenance
2.
3.
4.
1
2
5.
- | V1 | 2011.10
Remove the dummy drive from the carrier.
Install a new drive into the carrier with the printed circuit board side facing down so that
the mounting holes align with those in the carrier.
Secure the hard drive by tightening all 6 screws.
Drive carrier
SAS/SATA hard drive
Replace the drive carrier into the chassis bay, making sure that the drive carrier handle is
completely closed.
Hardware Installation Manual
Bosch Recording Station Appliance
Bosch Security Systems
Advertisement
Table of Contents
