Configuring Idockit For Windows Mobile 5.0; Quick Start - Motorola MC909X Integrator Manual

B - 2 MC909X Integrator Guide

Configuring iDockIt for Windows Mobile 5.0

To run iDockIt for the first time, tap
opens to the
General
When is running, you see its icon
iDockIt
menu.
Today Screen showing iDockIt Menu
Figure B-1
displays the
• Status
displays the
• Settings
host computer via a cable or cradle, the most recently viewed settings tab.
• is a toggle switch that checks/unchecks the
Enable
•
Modem Connect
this item when the mobile computer is in the modem cradle initiates dial-out.
displays version and copyright information.
• About
disables iDockIt and closes the application.
• Exit
iDockIt includes five tab pages:
- General setup options for enabling/disabling iDockIt and displaying status and other information.
•
General
- Settings for what iDockIt should do when it detects that the mobile computer is in an Ethernet
• Ethernet
cradle.
• - Settings for what iDockIt should do when it detects that the mobile computer is in a Serial or USB
Direct
cradle or connected to a host computer using a Serial or USB cable.
• - Settings for what iDockIt should do when it detects that the mobile computer is in a Modem cradle.
Modem
- Current connection status, continuously updated, scrollable window.
•
Status

Quick Start

Follow these guidelines. Refer to sections of this appendix devoted to individual tabs for details on settings and
options.
>
Start Programs
tab. Thereafter, if you need to restart
at the bottom of the Today screen. Tap the icon to display the iDockIt
tab.
Status
tab for the current connection or, if the mobile computer is not connected to a
Settings
is enabled when you have defined a modem connection in the modem settings tab. Tapping
from the Today screen and then tap the
, tap >
iDockIt Start iDockIt
setting on the
Enable iDockIt
icon; iDockIt
iDockIt
from the Today screen.
tab.
General