User Certificate Selection; User Certificate Installation; Server Certificate Selection - Motorola MC909X Integrator Manual

4 - 12 MC909X Integrator Guide

User Certificate Selection

If you checked the
authentication type, the
currently installed certificates before proceeding. The selected certificate's name appears in the drop-down list. If
the required certificate is not in the list, install it.
Installed User Certificates Dialog Box
Figure 4-12

User Certificate Installation

To install a user certificate (EAP TLS only) and a server certificate for EAP TLS and PEAP authentication:
Tap
1. Install Certificate
*********
Credentials Dialog Box
Figure 4-13
Enter the
2. User:
Tap Retrieve. A
3.
Tap ok to exit.
4.
After the installation completes, the
drop-sown for selection.
NOTE To successfully install a user certificate, the mobile computer must already be connected to a network from
which the server is accessible.

Server Certificate Selection

If you select the
Validate Server Certificate
Installed Server Certificates
list. If the required certificate is not listed, install it:
check box on the
User Certificate
Installed User Certificates
. The dialog box appears.
Credentials
, (password), and
Pwd: Server:
dialog indicates the status of the certificate retrieval.
Progress
Installed User Certs
check box, a server certificate is required. Select a certificate on the
dialog box. An hour glass may appear as the wizard populates the existing certificate
Tunneled Authentication
dialog box displays. Select a certificate from the drop-down list of
information in their respective text boxes.
dialog box displays and the certificate is available in the
dialog box or if is the selected
TLS