Battery Usage - Motorola MC909X Integrator Manual

Transmit Power Dialog Box (Infrastructure Mode)
Table 4-16
Field
Automatic
Power Plus
Transmit Power Dialog Box (Ad-Hoc Mode)
Figure 4-30
Power Transmit Options (Ad-Hoc Mode)
Table 4-17
Field
Full Select
highly reflective environments and areas where other devices could be operating nearby, or
when attempting to communicate with devices at the outer edge of a coverage area.
30 mW Select
15 mW Select
5 mW Select
1 mW Select
other devices in very close proximity, or in instances where you expect little or no radio
interference from other devices.
Tap to display the
Next

Battery Usage

Use the
Battery Usage
available: CAM, Fast Power Save, and MAX Power Save. Battery usage cannot be configured in Ad-Hoc profiles.
Battery Usage Dialog Box
Figure 4-31
NOTE Power consumption is also related to the transmit power settings.
Select (the default) to use the AP power level.
Automatic
Select to set the mobile computer transmission power one level higher than
Power Plus
the level set for the AP.
power for the highest transmission power level. Select
Full
to set the transmit power level to 30 mW.
30 mW
to set the transmit power level to 15 mW.
15 mW
to set the transmit power level to 5 mW.
5 mW
for the lowest transmission power level. Use this level when communicating with
1 mW
dialog box.
Battery Usage
dialog box to select power consumption of the wireless LAN. There are three settings
Wireless Applications 4 - 21
Description
Description
Full
power when operating in