4 - 30 MC909X Integrator Guide
Clearing the Log
To clear the log, tap
Versions Window
The
window displays software, firmware, and hardware version numbers. This window only updates when
Versions
it is displayed. There is no need to update constantly. The content of the window is determined at runtime, along
with the actual hardware and software to display in the list. Executable paths of the software components on the list
are defined in registry, so that the application can retrieve version information from the executable. "File not found"
appears if the executable cannot be found at the specified path.
To open the
Versions
Versions Window
Figure 4-42
The window displays software version numbers for the following:
•
Configuration Editor (Fusion 2.4 and lower only)
•
Fusion Build
•
LoginService
•
PublicAPI (Fusion 2.5 and higher only)
•
Photon10
•
WCConfigED
•
WCDiag
•
WCLaunch
•
WCSAPI
•
WCSRV
•
WCStatus.
Wireless Diagnostics Application
The
Wireless Diagnostics
To open the
Wireless Diagnostics
.
Clear
window, tap
in the
Versions
application window provides links to perform ICMP Ping, Trace Routing, and Known APs.
window, tap the
window.
Wireless Status
icon >
Signal Strength
Wireless Diagnostics
.