Table of Contents
Advertisement
Figure 7 - Speaker Test screen. Clicking on the icons
8. Calibrate your speakers
The MLD must know the precise 3D location of the four speakers with respect to the
origin; this is called "calibrating the speakers". First, choose the units that the MLD will
use, centimetres or inches, by clicking in the appropriate radio button in the "Set-up"
screen. Now click on the "Speaker Set-up" button. There are three ways to calibrate
the tracking system's speakers: automatic (the best way), manual regular (the fastest
way) and manual irregular (the "last resort" way). Figure 8 shows the screen with the
relevant areas.
Figure 8 - Speaker calibration screen showing the three
Page 24
generates audible tones from the speakers.
ways to calibrate the speakers.
MLD manual 1.1
Advertisement
Table of Contents
