Table of Contents
Advertisement
You may click on the "flip" button to invert your curve and on "copy" to load a curve
that you already designed for a different layer. Press OK to accept your curve or cancel
to ignore the data.
As you return to the edit media screen please remember that there can only be one
behaviour curve per layer. Still, within a single layer, you can associate several lights'
lighting parameters to be controlled dynamically as described by that curve. You may,
for example, choose for the "Dimmer" channel to be controlled by the curve in, say, 28
PALs: all those fixtures will dim according to the curve. In addition, you may also select
a different DMX channel for a different set of fixtures, for example the cyan channel in
12 MACs: all the MAC cyan channels will also follow the curve... and all of this from a
single layer!
Page 60
MLD manual 1.1
Advertisement
Table of Contents
